China SP/SPR Sump Pump factory and suppliers

SP/SPR Sump Pump

Short Description:

Type SP/SPR pumps are vertical, centrifugal slurry pumps which are submerged in sump to work. They are designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and water seal.They can also be operated normally for insufficient suction duties.
All parts of type SPR pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non-edge and abrasive particle.
The type with “L” is series of sump pump with extended shaft, which is suited for the working condition of deeper level. The guide bearing construction is added to the pump on the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.

Send email to us

Product Detail

Product Tags

Specification

No.	Part Name
1	Shaft
2	Bearing
3	Bearing Housing
4	Bearing Spacer
5	Bearing
6	Shim
7	Column
8	Strainer
9	Back Liner
10	Impeller
11	Pump Casing
12	Lower Strainer
13	Discharge Pipe
14	Flushing Pipe
15	Coupling Part
16	Middle Support Part

Pump Type	Max. Power ( kw )	Capacity Q		Head ( h/m )	Speed ( r/min )	Eff. (η/ % )	Impeller Dia. ( mm )
Pump Type	Max. Power ( kw )	m³/h	L/s	Head ( h/m )	Speed ( r/min )	Eff. (η/ % )	Impeller Dia. ( mm )
40PV-SP	15	19.44-43.2	5.4-12	4.5-28.5	1000-2200	40	188
40PV-SPR	15	17.28-39.6	4.8-11	4-26.0	1000-2200	40	188
65QV-SP	30	23.4-111	6.5-30.8	5-29.5	700-1500	50	280
65QV-SPR	30	22.5-105	6.25-29.15	5.5-30.5	700-1500	51	280
100RV-SP	75	54-289	15-80.3	5-35	500-1200	56	370
100RV-SPR	75	64.8-285	18-79.2	7.5-36	600-1200	62	370
150SV-SP	110	108-479.16	30-133.1	8.5-40	500-1000	52	450
200SV-SP	110	189-891	152.5-247.5	6.5-37	400-850	64	520
250TV-SP	200	261-1089	72.5-302.5	7.5-33.5	400-750	60	575
300TV-SP	200	288-1267	80-352	6.5-33	350-700	50	610
Remark	Parameter table above is only a part of whole. For more, please contact us directly.